Ask Experts Questions for FREE Help !
Ask
    philman's Avatar
    philman Posts: 1, Reputation: 1
    New Member
     
    #1

    May 14, 2010, 02:26 PM
    Honeywell RTH7500 programmable thermostat and Bryant 213A/214A Legacy Heat Pump
    Replacing the Bryant stock stat on a Bryant 213A/214A Legacy Heat Pump (about 2 years old) with a programmable Honeywell RTH7500.

    Old stat had 6 wires:
    Brown - W
    Orange - O
    Green - G
    Red - R
    Black - C
    Yellow - Y

    New stat has Heat Pump labels for:
    Left Side (C, G, Y, O/B, RC, R) and Right Side (Aux, E, L).
    And has Conventional Labels for:
    Left Side (C, G, Y, W, RC, R) and Right Side (W2, Y2).

    The R and RC are jumpered.
    So the wires should go with the same letter as before and the brown wire would go to the Aux on the right side?

    Thanks,
    Phil
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
     
    #2

    May 14, 2010, 07:03 PM

    Red to r jumped to rc
    Black to c
    Yellow to y
    Green to g
    Orange to o
    Brown to aux jumped to e
    icecold2's Avatar
    icecold2 Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 5, 2010, 06:10 PM
    Same issue did the answer fix it?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trying to replace a bryant heat pump thermostat with a Honeywell rth3100c [ 3 Answers ]

Trying to replace a Bryant heat pump thermostat with 8 wires connected with a Honeywell RTH3100C. Instruction guide says if W1, W2, and Y were connected, contact a HVAC tech. Honeywell customer service was no help. Any ideas?

Bryant tstatbbbhp01 with honeywell rth7500 [ 11 Answers ]

All right, I have searched through these forums and tried to piece an answer to my dilemma from various different responses, but am still not having any luck getting this to work. Here's my situation. I have a Bryant heat pump with emergency heat (model 663CJ036-F) that I want to replace my...

Did I buy a wrong programmable thermostat for bryant heat/ac system? Wiring confusion [ 8 Answers ]

We've been in this house for 25 years now and have had the same heater/ac/thermostat. Lately, I've been looking for ways to cut energy costs and so I bought a programmable thermostat (hunter #44550) based on good reviews. After I read the manual, I attempted to remove the cover plates to our...

Changing original Bryant thermostat to Honeywell programmable [ 2 Answers ]

First, I really want to express thanks for all the expert answers that helped on my last question. You guys rock! The advice worked like a charm! I tried replacing the thermostat before cleaning the flame sensor and now the A/C is not working!! The wiring on the old stat is R,B,W,Y,G and the new...

Wiring a honeywell RTH7500 Programmable thermostat [ 1 Answers ]

I am replacing my old thermostat a Trane BAYSTAT240A with a honeywell RTH7500 series one. There were eight wires on my old W- B- X2-Y-G-O-R-and a T. There is no spot to hook up the T wire although I got the unit to work. Right now the biggest problem is I can't read the display good because the...


View more questions Search