Ask Experts Questions for FREE Help !
Ask
    smusz8's Avatar
    smusz8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2009, 04:32 AM
    Wiring a honeywell RTH7500 Programmable thermostat
    I am replacing my old thermostat a Trane BAYSTAT240A with a honeywell RTH7500 series one. There were eight wires on my old W- B- X2-Y-G-O-R-and a T. There is no spot to hook up the T wire although I got the unit to work. Right now the biggest problem is I can't read the display good because the only time it comes on is if I touch a botton. Note on the old thermostat the R wire comes up around the mercury switch and then goes through a resistor and back under to where the T wire is connected to a small plate and this is what the top of the thermostat mounts to. Can anyone help me?

    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 14, 2009, 05:27 AM
    Besides following the manufactures install instructions the onlt thing I can offer you is this change over wire sub list. Look at the trane and GE baystat items. The T wire will not be used on the new thermostat just tape off.
    Attached Images
  1. File Type: pdf heat pump wiring.pdf (13.3 KB, 359 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring Honeywell Programmable Thermostat [ 10 Answers ]

I am having trouble figuring out the wiring for a new programmable thermostat installation. I moved into a barnd new house equipped with two Robertshaw Model 9400 Thermostats (one for each zone). I bought Honeywell RTH7500D programmable thermostats to replace them because I wanted programmable...

Wiring a new Honeywell programmable thermostat [ 6 Answers ]

I am replacing a Trane thermostat on my 10 year old heat pump ("for BAY 28X138 OR BAY 28X140) with a Honeywell Programmable 5-1-1, RTH7400 and the wiring letters are different. I got the thermostat to give me Aux heat, Heat, Off and Cool, but can not get Auto - the whole point of the...

Thermostat wiring for a hunter programmable from a 4-wire Honeywell [ 3 Answers ]

I have never done this and want to know how to connect the colered wires from my old Honeywell to the Hunter. I have Red, White, Green, Blue. Their connections are G, RC, Rh, y/o, w/b, y1. What goes where? Thank you

WIRING DILEMA , Honeywell Thermostat RTH7500D Programmable [ 2 Answers ]

Hello, I want to replace an Old thermostat mechanical type WHITE-RODGERS 1F56W-361model with the high tech Honeywell RTH7500D Programmable,. read carefully the Owner's Guide but my situation doesn't fit any description. I have 6 wires on the old thermostat to terminals: -RG(1wire) -RH(2...

Need help wiring Honeywell programmable thermostat [ 1 Answers ]

Have a 5-2 programmable Honeywell thermostat - replacing my old mercury unit. Have a spilt-system Bryant heat pump. Brown - Br Green - G White - W1 Blue - B Yellow - Y Red - R Connected G, W1, Y and R (not B, not Br). Heat works fine. Just switched to cooling and I only get hot air. Any...

View more questions Search