Honeywell RTH7500 programmable thermostat and Bryant 213A/214A Legacy Heat Pump
Replacing the Bryant stock stat on a Bryant 213A/214A Legacy Heat Pump (about 2 years old) with a programmable Honeywell RTH7500.
Old stat had 6 wires:
Brown - W
Orange - O
Green - G
Red - R
Black - C
Yellow - Y
New stat has Heat Pump labels for:
Left Side (C, G, Y, O/B, RC, R) and Right Side (Aux, E, L).
And has Conventional Labels for:
Left Side (C, G, Y, W, RC, R) and Right Side (W2, Y2).
The R and RC are jumpered.
So the wires should go with the same letter as before and the brown wire would go to the Aux on the right side?
Thanks,
Phil