Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fuel pump fuse has no power at it. Could this be the ignition switch?
[ 2 Answers ]
I got a 1992 Chevrolet 1500 with a 5.7l and the fuel pump isn't working. It has been sitting for about 5 years. I got a 12v test light and found out that the 20amp fuel pump fuse has no power on either side of the fuse. Could this be a ignition switch problem? The ignition switch is a little...
Ignition Module test
[ 2 Answers ]
Hi guys Furnace : whisperheat with ignition box close and open The furnace carries ignition model and spark sensor pilot. On G/V you can see mp mp/mv mv which are all connected to the igniton module and grnd connected to the furnace . Now the problem : When you call for heat ,the...
Changing out ignition module
[ 4 Answers ]
I'm in the process of changing out a G60RBG-3 for an S8610U Universal Intermittent Pilot Module. What is the correct location for the wires? Make: Bryant Model: 585JJ030075 Gas furnace.
Bad Universal Ignition Module?
[ 3 Answers ]
Hello, I had someone look at my handler and they said the circuit board went bad. He rigged one of the wires so that the fan would run and this would let the A/C come on. (I am in Florida) I called a company that worked on my friends unit and he instructed me to buy the WR 50A65-853 Model, but I...
Ignition module replacement
[ 1 Answers ]
How do you locate and replace ignition module in my chevy 1994 pickup 1500 350 View more questions Search
|