Ignition module replacement

rmarsh1976 Posts: 4, Reputation: 1

New Member

Nov 19, 2008, 04:47 PM

Ignition module replacement

How do you locate and replace ignition module in my chevy 1994 pickup 1500 350

CaptainRich Posts: 4,492, Reputation: 537

Cars & Trucks Expert

Nov 19, 2008, 04:56 PM

Number 14, inside the distributor.

Attachment 13840

Attached Images

Add your answer here.

Check out some similar questions!

Lennox Ignition Pilot Control Module [ 3 Answers ]

My problem with my Lennox furnace (model G23Q-3/4-100-2) is blowing cool air, and only occasionally heat was diagnosed as needing a Universal Pilot Module, part #53L9001 also known as 53L90. Question, if we purchase the part how difficult is the installation?

Lawn Boy Ignition Module [ 1 Answers ]

I have a 6.5 hp model 10324 Lawn Boy that has no spark. How do you check the ohms on the ignition module and what should it be? Also what is the clearance from the flywheel to the contacts?

Testing spark ignition module [ 11 Answers ]

Hi, I have an Armstrong hi-e furnace, that I suspect has a faulty spark module. (The blower control board, the gas valve, pilot, and spark device are all new). The module is a Honeywell S8660k. The manual says to test the spark at the module. Can anyone tell me how to go about that? The lead to...

Ignition control module short where? [ 3 Answers ]

I have a 1991 Ford Ranger 4 wheel drive with the 2.3L 4 cylinder engine. It has new wires, coil packs, and crank shaft position sensor. There are no burnt wires, fuses, or fusible links. There are also no chafed, pinched, or loose wires or connections in the harness yet I keep burning the Ignition...

1992 ignition module location [ 1 Answers ]

Can anyone tell me the location of the ignition module on a 1992 Pontiac Grand Am, 4 cylinder (2.3 liter)?