Heil furnace blowers limit switch\ blower won't cutoff

otillie Posts: 1, Reputation: 1

New Member

Apr 26, 2010, 05:50 PM

Heil furnace blowers limit switch\ blower won't cutoff

I have a heil furnace.it runs and heats.but when the heat turns off the blower keeps running.

Joshdta Posts: 2,549, Reputation: 45

Ultra Member

Apr 26, 2010, 06:04 PM

Probably need a new camstat. How old is the furnace?

Add your answer here.

Check out some similar questions!

Carrier furnace: limit switch fault furnace has ignition but blower will not come on? [ 2 Answers ]

Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?

My Heil gas furnace blower keeps running [ 4 Answers ]

I have a Heil Gas Furnace and the blower keeps running all the time. The heat comes on when called to but once the temperature gets warm enough for the heat to turn off the fan keeps running. Once the heat turns off the fan blows cold air. The fan is on auto and I have cycled power several...

Heil Furnace blower won't come on UPDATED [ 3 Answers ]

Ok It is a Heil gas furnace. No belts. The motor I hear running is apparently the electronic ignition that comes on when I turn the electric on to the furnace. The burner fires, heats and goes out once heated up, no blower comes on. I was told to clean the heat sensor since it may be corroded....

Blower limit switch [ 2 Answers ]

I have had the thermostat off for a few months, but its starting to get hot here. Today, the blower motor came on by itself. I turned on the thermostat in cooling setting, but my blower motor would not turn on after the thermostat turned on the compressor. It's summer and very hot in my attic....

Blower won't come on Heil furnace [ 2 Answers ]

I have a heil furnace in a home I just purchased. The first day it worked fine. Second day, it fires up, I can hear a motor running, but the blower doesn't come on. Relay switch? Thank You!