Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Low pressure from submersible well pump
[ 10 Answers ]
I'll summarize what my situation is and what I've done so far. Pressure tank doesn't fill with water Pressure tank air pressure is 28 PSI Tried installing brand new pressure switch and water pressure gauge Water pressure gauge rose to 26 PSI when I turned the pump breaker back on It stays at...
Can't get pressure over 25 psi in my pressure tank
[ 4 Answers ]
Hi, For some reason I can't get the gauge for my water tank to go over 25 psi. The problem started about a month ago. We have three bathrooms (2 upstairs one downstairs.) The water pressure use to be great, two people could shower in the two upstairs bathrooms at the same time and still have great...
Submersible pump is working but we can't get pressure to build to the normal 76psi
[ 0 Answers ]
We have a well that has been fine for 10 years. The pump that was in there was a 25gallon per minute. We originally installed a pump and it failed right away and was sent back to the manufacturer and it turned out an impeller was installed backwards. They warranty'd it and sent it back to us. ...
Craftsman 2500 psi pressure washer with honda GVC 160 motor
[ 1 Answers ]
Will not start. Used it all summer and went to add Stabil and get it ready for winter storage and I cannot get it started. Fuel is on, has gas, replaced spark plug, checked air fillter, and used choke.
Well pump does not hit 50 psi
[ 14 Answers ]
Hello everyone- I have a 2" 3 year old well pipe that was never used. I have finally hooked up a 1hp above ground pump to it and it pumps water great. I have a 30 gallon bladder tank and a water softner hooked up to it as well. Question: Pump came set at 30-50 psi in and out so I filled... View more questions Search
|