Ask Experts Questions for FREE Help !
Ask
    sudsman32's Avatar
    sudsman32 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 18, 2009, 01:40 PM
    Craftsman 2500 psi pressure washer with honda GVC 160 motor
    Will not start. Used it all summer and went to add Stabil and get it ready for winter storage and I cannot get it started. Fuel is on, has gas, replaced spark plug, checked air fillter, and used choke.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Oct 18, 2009, 02:49 PM

    Do you have spark. Hold plug against block with a piece of wood and check for spark.

    If no spark, start hunting down a safety or kill switch problem.

    If it has a low oil level switch, check that.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 2100 PSI 2.0 GPM 5.0 HP pressure washer [ 1 Answers ]

I have a used Craftsman 2100 PSI pressure washer that is acting up. I received this pressure washer from a relative who was having problems with it and just decided to buy a new pressure washer instead of messing with it and getting it fixed. The engine starts right up and runs good and smooth, I...

Craftsman pressure washer [ 1 Answers ]

I have a craftsman model 580.762012 washer. It started losing pressure some of the time. I could stop and restart it and it worked most of the time. Now it will not pressure up at all.. I have cleaned the rig. Water will run through it but it will not pressure up at all now. Thanks for the...

Craftsman Pressure Washer with Honda Gas Engine [ 2 Answers ]

I have a 5 year old Craftsman pressure washer with a Honda gas engine Model Number 580.768350. When I start the machine up and press the nozzle it has great pressure but once I release the nozzle to do something else and go to press it again there is no longer any pressure. If I stop the machine...

Craftsman pressure washer 3000psi 7.0hp [ 2 Answers ]

I have used my washer twice and loved it. Now I go to use it and it runs fine, but no pressure. Is there anything I can do to correct this other than take it in for repair?


View more questions Search