 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Front suspension
I drove into a kurb and bent the alloy wheel on my car. When I changed to put the spare on it would not fit because I think the swing arm is bent back. Please can someone tell me if this can be fixed and if so how much it might cost. Also I don't know the correct terms for the bits I think I have damaged. The car is a peugeot 306 diesel estate v reg
Cheers for your help |
||||
|
||||
|
You bent the steering arm on the steering knuckle (from your description--or you bent the tie rod). No way to fix either of these. They must be replaced. If it's the steering knuckle, find one at a junk yard. If you bent the tie rod, those are cheap enough that you can buy them new. Get the vehicle aligned after you replace the parts. |
||||
|
||||
|
If you damaged the outer tie-rod end ($22), here's how you can replace it yourself: https://www.askmehelpdesk.com/cars-t...ml#post1882349 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is lower pin called that holds front hub assembly to suspension arm on 96 lasabre
Have a model 2400aww maytag front load washer. How do I remove the front panel or what is the best access to the drain pump?
1995 f150 v8 5.0, dual tanks- front tank doesn't work, gauge works fine w/ booth tanks, I used a test light to see if the pump was getting power and it was for about 3 seconds after I would turn on the key then I quit, since it got power and the pump never came on I replace the pump, but nothing...
I have a 2002 chevy Impala Ls Sedan. When I turn the steering wheel and back up and then put it in drive and take off the message center says Traction Activated, and when I make a turn or go around a slow curve the front end makes a whining sound. What could that be? Thank you, Trebor
I got a suspension in middle school.can this effect my future in college??
View more questions Search
|
