Ask Experts Questions for FREE Help !
Ask
    fabricater1's Avatar
    fabricater1 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2010, 07:13 AM
    What is lower pin called that holds front hub assembly to suspension arm on 96 lasabr
    What is lower pin called that holds front hub assembly to suspension arm on 96 lasabre
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Feb 13, 2010, 08:13 AM

    The ball joint connects the hub assembly to the lower control arm ("A" arm). The pin you are referring to is likely the ball joint stud. It's best to use a tool like the one below to separate the ball joint from the control arm:

    http://www.harborfreight.com/cpi/cta...emnumber=99849
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My cars front suspension. [ 2 Answers ]

I have a 2002 chevy Impala Ls Sedan. When I turn the steering wheel and back up and then put it in drive and take off the message center says Traction Activated, and when I make a turn or go around a slow curve the front end makes a whining sound. What could that be? Thank you, Trebor

Strange ache in lower right arm - what could his be? [ 3 Answers ]

For the past couple of days I've been experiencing a strange achey sort of feeling in my lower arm. To describe it best, I'd say if felt like when you've fallen asleep on your arm or if you apply pressure to the artery. I googled my symptoms and the two things mentioned were a blood clot or...

Lower ball joint/control arm [ 1 Answers ]

I have a 2002 c230 Mercedes and was told by the dealer I need to have the right lower ball joint/control arm replaced. I have 150,000 miles on my car. Need new front brake pads and rear pads and rotors. But have no noise or shaking when braking. What do you think? Second opinion?

View more questions Search