Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
The blower will not come on when heat is called for. In Auto bad, switch to On fine.
[ 0 Answers ]
I have an old Carrier Split system (cerca 1983) I replaced the gas valve, then the board. The only thing I haven't changed is the transformer. When the unit is on heat the burners ignite, but the blower will not come on. I have to put the fan in the "on" position to get the blower to come on. When...
Auto change over switch
[ 0 Answers ]
Please I need the wiring diag of auto change over switch in emergency supply
Auto/ on switch on Goodman/Amana Heating/cooling unit
[ 2 Answers ]
I have a Goodman/Amana heating and cooloing unit (Model # PTC073B35AE) that is hooked up to a remote thermostat. What shoud the auto/on of the unit itself be placed at. It seems to be running too much and my elelctric usage is way higher than should be.
HEAT-OFF-COOL system switch - AUTO-ON fan switch
[ 1 Answers ]
From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...
HEAT-OFF-COOL system switch - AUTO-ON fan switch.
[ 2 Answers ]
Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the... View more questions Search
|