 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Goodman/Amana heating and cooloing unit (Model # PTC073B35AE) that is hooked up to a remote thermostat. What shoud the auto/on of the unit itself be placed at. It seems to be running too much and my elelctric usage is way higher than should be.
I am changing out a 4 wire 3 speed fan switch (K.T.E. 3089) that went bad for a for a ZingEar ZE208S. Are the terminals wired the same? Does the L on one terminal on the switches stand for line or load? Thanks, CB
It's worth noted that I am a complete novice, so please be patient with me. I want to replace an existing pilot light switch with a single-way lighted switch. The existing setup has four terminals (red wire, black wire, white wire, and ground wire). The red wire goes to the left, the black wire...
From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...
Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
