Ask Experts Questions for FREE Help !
Ask
    Cannan61's Avatar
    Cannan61 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2007, 07:34 AM
    HEAT-OFF-COOL system switch - AUTO-ON fan switch.
    Dear Gurus,
    I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the temperature but still the fan is turned on. Can any one help me out on how to turn off the fan? (There is no Fan Off switch there is only FAN Auto & FAN ON switches).
    Any help will be greatly appreciated.
    Thanks & best regards in advance.
    Kannappan.S
    [email protected]
    716-697-3122.
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Aug 6, 2007, 02:30 PM
    Sounds like the fan relay must have stuck closed, could be a fan relay or a PC board that controls the fan.
    acetc's Avatar
    acetc Posts: 1,004, Reputation: 79
    Ultra Member
    		  
    #3

    Aug 6, 2007, 07:46 PM
    Some of the newer furnaces keep the fan running when the transformer in the printed circuit board blows or the transformer goes bad, check for this fuse if it is blown then you may have another problem such as shorted thermostat wiring or shorted controls. Mike
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring ceiling fan switch and light switch [ 1 Answers ]

I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...

Should I have the fan switch turned to "ON" or "AUTO"? [ 6 Answers ]

Should I have the fan switch turned to "ON" or "AUTO"?

Furnace will not switch from heat to cool [ 2 Answers ]

My furnace operates fine, until I switch from heat to cool. When I switch it willnot do anythig and I have to call out a reapirman. My house was under warranty and I thought the problem was resolved, but it wasn't . What are some thins I can look at?

Fan Blower doesn't come on in Fan,heat or cool [ 2 Answers ]

Yesterday I turned on my heat(coil in air handler) and everything worked fine. Last night I turned it on again and the fan wouldn't come on no matter where the switch was: fan only, heat or air. I made the appropriate temp changes for heat/air. There is a humming noise coming from the heating coil...

View more questions Search