Ask Experts Questions for FREE Help !
Ask
    rcollins07's Avatar
    rcollins07 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2010, 07:20 AM
    How do I replace the tube in the door
    I have a ge fridge it has water and ice on the door. There appears to be a clog between the bottom of the door and where it comes out. I have disconnected the tube at the bottom of the door and when you press the button water comes out there. So the tube I am assuming is clogged. How do I replace it? I cannot see a way to get to it.
    skidoo9's Avatar
    skidoo9 Posts: 11, Reputation: 1
    New Member
    		  
    #2

    Mar 5, 2010, 01:49 PM

    Have you tried blowing through the tube from top to bottom? Open valve where the water comes out and blow air through after you have disconnected the hose at the bottom.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I want to replace a service door with a garage door [ 3 Answers ]

My garage runs into my basement. I only have one single car garage door. My basement wall is a block wall. My floor joist run parallel to the wall with my garage door. What I want to do is install a second single car garage door next to my existing garage door where a service door is located. ...

Jeep GC replace door latch [ 4 Answers ]

I have a 93 Jeep Grand Cherokee. The driver side door latch is broken, (not operational). The door won't open. I have been trying to find another door latch at the local salvage yards without any luck. Does the replacement latch have to come from a jeep GC, or is there another vehicle that could...

Replace shower door [ 2 Answers ]

We have a small fiberglass shower unit and the water is leaking out from under the door and now notice several screws are just floating and not holding the door on.. How do we buy a new door and attach it to the old shower?. do we make new holes for screws? Thank you Elena :)

How to replace inner tube [ 1 Answers ]

I need to replace a front wheel inner tube, briefly, run me through what to do please. I need to take the wheel out don't I? Thanks. Valjomcs

View more questions Search