 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3 piece fiberglass shower stalls leaking
I ahd just purchased a 3 piece shower stall with base, side and top. I joined the pieces together with chaulking but ran into problems. The lower portion that attaches to the base has 4 bolts that hold it together,which I put generous portions of Quik-plus and bolted it back together. The top portion only sits on the sides but I chauked it also.
I now have leaks from these overlap joints. Is there any special chaulking I should be using as well as some c-clamps. I just finished putting the dry wall back up. Help |
||||
Check out some similar questions!
Resurface Fiberglass Tub/Shower 1-piece shell One of the bathrooms in my apartment building has a one piece fiberglass shell tub and shower shell. BEFORE I bought the property a prior owner =painted= the entire inside of the tub/shower shell! Looks like they didn't prep the surface well...
Hi, I have a MAXX fiberglass shower stall that has always leaked. I've recaulked three times, once by the installer and twice myself. The only way I've stopped the leak was to tape the seams with duct tape so I know it can be made water tight. Do you have any suggestions as to how to make the...
Hi! I'm reading this long after you asked the question, but I was wondering what you ended up doing.. I had a similar problem with a shower pan at a place we owned in CA. Before selling, I fixed it via the use of a paint which I think I found at Home Depot; this would have been in 2000 or...
One of my costomers needs a very thick soap like film cleaned out of her shower. She says that nothing she has used will cut through it. I thought id try to buff it out, but what kind of cleaner do I use?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
