Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Resurface Fiberglass Tub/Shower 1-piece shell
[ 13 Answers ]
Resurface Fiberglass Tub/Shower 1-piece shell One of the bathrooms in my apartment building has a one piece fiberglass shell tub and shower shell. BEFORE I bought the property a prior owner =painted= the entire inside of the tub/shower shell! Looks like they didn't prep the surface well...
Cleaning fiberglass shower pan
[ 11 Answers ]
I just regrouted a shower area and it turned out great. However, the home has a MUSTEE fiberglass shower pan. The pan is showing staining and discoloring in the foot traffic area. I have tried Tilex and many other shower cleaners with no improvement on the staining. I'd appreciate any advice to...
Cleaning fiberglass jacuzzi tub
[ 2 Answers ]
I am rehabbing a house in Mississippi, and the painter dripped a lot of paint in the jacuzzi tub. We don't want to scratch the tub. How can we remove the paint?
4-piece shower install
[ 1 Answers ]
I am getting ready to attempt this for first time with a Kohler/Sterling unit. It does not mention the use of a mud base. Is this needed? Any earlier post here talks about using a rubber material to prevent squeaks. Is green board the type of material to finish the top areas. The...
One piece shower leak
[ 2 Answers ]
I have a one piece shower that is leaking. I have taken the quarter round off around the front of the shower unit and the adjacent base boards and water is slowly seeping out from under the shower. The quarter round trim was very wet. Is there anyway to get the remaining water out from under the... View more questions Search
|