Ask Experts Questions for FREE Help !
Ask
    amateur123's Avatar
    amateur123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 4, 2010, 06:22 PM
    What is the proper program boiler cycle
    What is the proper temperature cycle for a gas-fired home boiler (including timing of cycles)? A separate zone of my house does not reach the desired temperature during cold weather. This has started after my system was converted from oil to gas. The installer has checked everything (bleeding; sizing of the zone and boiler; etc) and now states that more radiators are needed in the zone. Is it possible that this is a control problem and that the zone does not get hot water long enough to reach the desired temperature?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Feb 4, 2010, 07:05 PM
    Is it possible that this is a control problem and that the zone does not get hot water long enough to reach the desired temperature?

    Yes
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Steam boiler cycle too fast? [ 3 Answers ]

We recently purchased a home and have no experience with steam heat. From the information on the boiler it was replaced in 2000. We live near Cleveland Ohio and the weather is, of course, cold and getting colder. Our gas bill last month was 89.00 this month 404.00. With average temperature of...

Boiler overheats water and does not cycle off [ 1 Answers ]

I have a HBSmith Boiler, I have not had it turned on for at least a year and a half, at that time I also turned off the water ( the water is high in iron and there is some sediment) to the boiler , I heat with wood but need boiler for the holidays. Temperature goes to over 200 degrees and does not...

Boiler cycle time. [ 10 Answers ]

My thermostat is set at 68. The boiler (Hot water) kicks on when needed. The problem is that it will turn off before it gets to the set degree, for a few minutes. Then it turns back on and continues to the set degree. Why is this and is it supposed to do this? Could it have anything to do with the...

View more questions Search