Ask Experts Questions for FREE Help !
Ask
    bamafan3164's Avatar
    bamafan3164 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2007, 05:39 PM
    Kenmore beeps constantly
    My 14 month Kenmoe Elite Oasis 110.2703 beeps constantly. When you turn it on, it beeps constantly and turns on and off by itself. What do I need to repair? HELP
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 25, 2007, 05:55 PM
    Does this have a 1 or 2 year warranty. Can't remember. But normally the this is a problem on the board and has to be replaced. These are a little pricey is why I ask about the warranty.
    Suprtek's Avatar
    Suprtek Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Jan 26, 2010, 05:33 PM
    I know this is an old post but I thought I would post this info anyway for future users. I had this exact problem. It turned out to be a loose solder joint on the potentiometer that controls the water level. Five minutes with a soldering iron and it was fixed. Lots cheaper than a new board! I am not an appliance tech but as near as I can tell, any input from any button or knob will turn this washer on and/or create a beep. Therefore, a loose connection or solder joint at various locations on this board could cause the same problem. Hope this helps someone.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black Screen + Beeps! [ 5 Answers ]

Hi, I have a HP a1740n, and all of a sudden I started it and NOTHING came on screen, not even the HP logo... It's just black, followed by one beep and then another longer one... What could it be?? Thanks!

Dryer Beeps [ 5 Answers ]

Hello I have a problem with a Kenmore Elite dryer (electric). While drying, it started beeping with continuous beeps and refused to stop. It can't be reset. I pulled out the power cable . Left it alone for a few hours . No change. Any suggestions ?

Kenmore Elite HE3 Beeps 3 times won't start [ 2 Answers ]

Hello My Kenmore HE3 ELectric dryer model 110 82832 100 just stopped working. There is power and when I press a mode button the digital display shows the minutes, etc. When I press the start buttin it just beeps 3 times. Anyone with the same problem? Thanks

View more questions Search