My 14 month Kenmoe Elite Oasis 110.2703 beeps constantly. When you turn it on, it beeps constantly and turns on and off by itself. What do I need to repair? HELP

Does this have a 1 or 2 year warranty. Can't remember. But normally the this is a problem on the board and has to be replaced. These are a little pricey is why I ask about the warranty.

I know this is an old post but I thought I would post this info anyway for future users. I had this exact problem. It turned out to be a loose solder joint on the potentiometer that controls the water level. Five minutes with a soldering iron and it was fixed. Lots cheaper than a new board! I am not an appliance tech but as near as I can tell, any input from any button or knob will turn this washer on and/or create a beep. Therefore, a loose connection or solder joint at various locations on this board could cause the same problem. Hope this helps someone.