Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Remote Control Ceiling Fan wiring for a double wall switch
[ 5 Answers ]
I purchased a Hunter remote control ceiling fan. I've replaced fixtures before in my home, so I thought this would be a no brainer. Well the remote thing has me stumped. House is pre-wired with a double wall switch, one with a dial control for the fan, the other switch is for a wall outlet...
HUNTER LIGHT SWITCH (has fan and light control)
[ 4 Answers ]
Switch for light control broke off. Having trouble taking off wall light switch cover. I removed the skrews but the switch cover doesn't pry off wall. Thanks.
Hunter fan w/ light & reversing switch on remote, remote not working properly
[ 1 Answers ]
Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...
The dip switch on a remote control
[ 2 Answers ]
Ok, yesterday I learned that to change the frequency on the remote that runs my ceiling fan, I need to adjust the dip switch. Right now, I have two fans that are on the same frequency and when I turn one on, the one in the other room comes on too. So I need to adjust the remote and the canopy? ...
Wiring for DUAL wall switch to control Ceiling Fan and Light Separately
[ 20 Answers ]
Greetings. I recently bought a new ceiling fan and light kit to replace one that had been in my sun porch for over 20 years. A dual wall switch was always used to control the light and fan separately on the older fan. The fan speeds were controlled by pull chain. Before I took the old fan down, I... View more questions Search
|