Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Concord Gas Furnace
[ 2 Answers ]
I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...
Concord 90 plus gas furnace
[ 0 Answers ]
I have a concord 90 plus series furnace. Call a repair man. Was fix for a day or two. Change thermostat. Furnace click on cool air comes out and then heat kick in for 7-10 minutes. And then cool air kicks in. later on cool air comes on and stays on heat never comes back on. Unless I reset it. Have...
Concord gas furnace
[ 1 Answers ]
Hello Been looking at various problems with the concord. Most seem to be limit switches. Problem with mine is the small side hose from exhaust blower To switch is accumulating about inch of water in it And is shutting furnace down. Once tube is drained she fires up and Runs for 2 days then...
Concord 90+ gas furnace
[ 1 Answers ]
Pressure switch open with inducer on ? What's the fix?
Concord 80 plus gas, furnace
[ 5 Answers ]
Hi, glad to find some help, I found your site by accident,or my good fortune! I have a concord 80 , the thermostat clicks and the blower comes on but the furnace does not light,all help appreciated View more questions Search
|