Ask Experts Questions for FREE Help !
Ask
    bnwpnh's Avatar
    bnwpnh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2008, 08:36 AM
    Concord 90+ gas furnace
    Pressure switch open with inducer on ? What's the fix?
    dale3's Avatar
    dale3 Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Oct 25, 2008, 09:01 AM
    Possible cracked or plugged tubing or ports. Possible bad pressure switch or inducer not pulling enough vacuum. Flue pipes plugged or sagging. Condensate drain plugged etc.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord 80 plus furnace [ 2 Answers ]

I have a concord 80 plus that is mounted horizontally. The pilot light turns on, the gas ignites, but will only stay lit for a few seconds. It will try this three or four times before the blower shuts off. The thermostat works fine (atleast it did for ac). Any suggestions?

Concord 80 plus gas, furnace [ 5 Answers ]

Hi, glad to find some help, I found your site by accident,or my good fortune! I have a concord 80 , the thermostat clicks and the blower comes on but the furnace does not light,all help appreciated

Concord furnace +90 [ 3 Answers ]

My furnace will not come on. Nor will my ac. This is a concord 90. I have power to the unit, and the red LED is on and not flashing. Help, Walt

Concord 80 plus furnace [ 2 Answers ]

I am wondering how many BTu this furnace is? I can not find it anywhere. Thanks!

Furnace filter for a Concord 80 plus furnace [ 2 Answers ]

I just moved into a beautiful home. I am currently a renter. There is a new concord 80 plus furnace installed. I know it needs a filter but I'm not for sure as to where it goes?

View more questions Search