 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Concord 90 plus gas furnace
I have a concord 90 plus series furnace. Call a repair man. Was fix for a day or two. Change thermostat. Furnace click on cool air comes out and then heat kick in for 7-10 minutes. And then cool air kicks in. later on cool air comes on and stays on heat never comes back on. Unless I reset it. Have to drain tube in front of furnace. Help!!
|
||||
Check out some similar questions!
I have a Concord Gas Furnace Model CG90UB... it currently is wired to run the fan on low speed which I find is not adequate to move the air around the house... I would like to know how to change the fan speed to run on medium... the manual states there are four speeds... Low, Low Medium, Medium and...
Hello, my Concord 80 turn the sparker on, then the burners turns on like supossed to, the problem begins when the sparker shuts off, aparently the burners shuts off at the same time the sparker does. As a result the blower never turns on.
My concord 80 plus gas furnace does not stay running even though the thermostat is calling for heat. The smart valve does 6 pulses when it goes into this mode. Could this be a thermocouple problem or should I look elsewhere? Thanks
Hello Been looking at various problems with the concord. Most seem to be limit switches. Problem with mine is the small side hose from exhaust blower To switch is accumulating about inch of water in it And is shutting furnace down. Once tube is drained she fires up and Runs for 2 days then...
Pressure switch open with inducer on ? What's the fix?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
