Ask Experts Questions for FREE Help !
Ask
    pjc123's Avatar
    pjc123 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 01:04 PM
    Goodman GMNT100-4
    Goodman GMNT100-4 condensing gas furnace installed in 2002 uses propane gas.
    Motor turns on at thermostat setting but no heat. I have only the installation & Operating manual but see no pics of what/how to troubleshoot. Have taken front panel off and see no sign of ignition nor odor of gas.
    Any thoughts - Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 10, 2010, 01:28 PM
    It could be many different things.

    First turn off main power at panel and after a few seconds turn back on. This will cause a reset. Then go to the furnace and see if it runs. Post back with results
    pjc123's Avatar
    pjc123 Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jan 11, 2010, 08:39 AM

    Thanks for help, did that and no difference at all. Got call back from service firm and they s/b here today.
    pjc123's Avatar
    pjc123 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Jan 11, 2010, 11:46 AM
    Problem was igniter - I can see burn marks. NOW, part # B1401015 no longer seems to be produced & I'm told I'll need to retro fit a universal igniter. It seems to me that if Goodman no longer makes this part # there should be another after market mfgr who makes a part I do not need to modify.

    Any thoughts?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Jan 11, 2010, 01:24 PM
    Yes since the part is no longer available it has been substituted with a newer and better part more than likely. You will need to buy the change over part and install it if you want your unit to operate. Parts become obsolete every day in the HVAC industry just be glad you do not have to replace the 200.00 circuit board to go with the new ignitor. The new ignitor might need modifications to fit your furnace but that can only be told once the new part is obtained and the install is done.

    Furnace Ignitors/Pilot Assy
    pjc123's Avatar
    pjc123 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Jan 11, 2010, 02:56 PM
    Thanks, I'll have the answer tomorrow.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman [ 2 Answers ]

Led light always on. Furnace will not do a thing

Goodman furnace [ 1 Answers ]

Good man furn blinks 6 times No power at therm Blower runs

Goodman gmnt100-4b furnace won't lite [ 8 Answers ]

I have a 4 year old furnace. Igniter glows but will not ignite.then it shuts down. Then starts to recyle again. I have checked voltage at the gas valve and all limit switches. All read 25 volts except one. I was told by a hvac repairman to jump it to see if it is the problem. Jumping made no...

Goodman a/c [ 1 Answers ]

Heyi'm new at this. Looking for wiring diagram for goodman a/c phkj 060-1 a/c heat pump. All I can find on the internet are questions & more questions. Thanks in Advance triggerjunbug, ala.

Goodman [ 2 Answers ]

I'm shopping for a new forced air furnace. The lowest price I have is for a high efficiency furnace made by Goodman. Never heard of this manufacturer. What is the quality rating for Goodman high efficiency furnaces? Thanks

View more questions Search