Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installed new evaporator fan motor and relayoverload & frig still working properly.
[ 2 Answers ]
We have a Maytag Plus Refrigerator MTB1956GEW. We replaced the relay overload and then realized that the evaporated fan motor was not working. So we ordered that part and replaced. The fan began to work immediately;however it is now not working. Therefore, the refigerator is not being cooled....
New furnace installed, do I need a new b-vent
[ 1 Answers ]
I have just had a new Payne furnace installed and have been told that the b vent needs replacing. Does that b-vent need to be for my hot water heater as well as my furnace? How much is the average cost of getting a b vent installed by a professional, this b vent will vent the furnace in the...
A/C Coil installed with furnace - cost?
[ 3 Answers ]
We recently got a new gas furnace, and had some troubles with the contractor (did not pass city inspection 4 times and got huffy with us and with the city). During some conversation with us, he told us that he could install the furnace in a way so as to make it easier to add AC at a later date. ...
I installed a new waterheater and its not working properly what could it be
[ 2 Answers ]
It gets hot but don't stay hot very long >Moved from Forum Help<
Installed a new blower in furnace
[ 5 Answers ]
I have installed a new blower motor and the motor blows to fast and cuts off three to four times a cycle. Any help? View more questions Search
|