Ask Experts Questions for FREE Help !
Ask
    dog-breath's Avatar
    dog-breath Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 7, 2010, 05:55 AM
    Its 27 degrees out and my thermostat is set at 70 dgrees. Why won't it shut off?
    Shouldn't the ac unit eventually reach the desired setting and shut off?
    dog-breath's Avatar
    dog-breath Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 7, 2010, 06:04 AM

    My ac unit won't cut off. Its 27 degrees out and I have the thermostat set on 70 degrees. It warms the house to 70 but keeps running. There is ice around my outside unit too. What do you recommend?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell RTH221 thermostat is set @ 74 degrees at night, but only goes to 72. [ 1 Answers ]

I have a honeywell RTH221, I run the schedule wake, sleep and leave. I want my temp set at all around 73 degrees and for some reason dips to 62 degrees in the middle of the night before turning on again, during the day it drops from 73 degree dipping to 67 degree before turning on again! Is that...

Can pre-set my Furnace to 80 degrees, if so how [ 0 Answers ]

My house is not insulated well, 70 degrees pre-set is just too cold, how do I preset it higher?

A/C won't shut off, says 77 degrees but it's freezing! [ 3 Answers ]

Hi there, single mom here and have no clue where to start, glad I found this site. I have a Honeywell programmable thermostat and it's acting very funny. The A/C not only won't shut off in the 'auto' position, but the thermostat stays stuck at 77 degrees although it feels more like 57 degrees...

Intertherm a\c won't shut off by thermostat [ 8 Answers ]

Need help! I have Intertherm furnace and a\c system model number MGH-100-ABWN-05 while the heat\a\c switch on the furnace is on A\C my thermostat can't control it. I have a electronic thermostat made by ritetemp (model number 8030C). I do have the RC terminal jumpered to the RH (r on the...

View more questions Search