 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to power a bead roller
I have a low cost manual bead roller. I would like to adopt a garage door opener to driver the rollers. Anyone have an idea how I can control the opener to be on or off, and reversible? I would like to use a foot switch to turn on the power. A toggle switch would be OK for reversing it.
Can I simply locate the circuit board, and cut it out. Then attach switches as needed to control the unit? |
||||
Check out some similar questions!
I have a question for you drywall experts here. I am finishing my basement. I will not be putting in a drop ceiling, rather, we have painted the ceiling - the joists, the HVAC, the plumbing, everything, with Dryfall black paint. I intend to lay the drywall down so that I have the finished...
Hello. What's the best way to install corner beads for drywall jobs? I'm seeing more people prefer nails. If I am going to use nails, which type should I get and what length? I installed half inch drywall. Thanks.
What type of corner bead would you recommend and why(metal, plastic, glue type)? Thanks, Gregg
I have green board on the bathroom walls, and durarock on the floor and the entire shower. This is a new bathroom I am building. My question was should I put the paper corner bead on the corners which have durarock. These corners are the sides of my shower where my doors are going. If I use corner...
I have new durarock and green board on my walls and floor on the outside corners should I put corner bead and mud before tiling or should I use thinset
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
