Ask Experts Questions for FREE Help !
Ask
    borin2es's Avatar
    borin2es Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2009, 08:55 AM
    I have a guardian upflow furnace, 92% eff. That is continually sending a #3 error
    I have a guardian upflow furnace, 92% eff. It is sending me a #3 error (pressure switch is stuck open), it had happened to me about 3 weeks ago, turned off the furnace for about 15min and the error cleared and it has worked fine ever since, now I am getting the same error but cannot get it to clear and am not sure what to do to get the furnace to start again and hopefully stop this from happening in the future. Thanks for your help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 29, 2009, 09:38 AM
    Looks like you will be needing to replace the pressure switch unless you have the capability and tools to check the system further.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can this Carrier Furnace be used for upflow venting? [ 2 Answers ]

We got new CARRIER Furnace 70,000.BTU, Model.# 58STX070E last year. Now we are remodeling our house and looking to move the ducts in the ceiling. Our contractor is saying that this furnace is not going to work as this is downflow venting and putting the ducts in the attic will require...

80% eff furnace [ 31 Answers ]

Can I convert an 80% eff furnace to a 100% eff? I have an older furnace that I want to put in a house but the house has no chimney. Any suggestions? Thanks Jeff

Carrier Hi Eff Furnace [ 6 Answers ]

I need to know the MBh for a 58UVB060, does anyone know?

Carrier upflow furnace [ 2 Answers ]

I Have an older ( 6 yrs old) carrier upflow natural gas furnace. Since purchasing the house it came with I have not been able to maintain a constant temperature. The furnace fan comes on, stops, the small blower fan starts and follows with the igniter and gas ignition. It will run for a few...

Bryant upflow furnace model394g lp [ 1 Answers ]

How do you adjust pilot light?

View more questions Search