Ask Experts Questions for FREE Help !
Ask
    codoug's Avatar
    codoug Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 20, 2009, 09:37 AM
    Bryant furnace
    My furance fan will not shut off, I have taken off the t-stat and this does not help, the fan runs but the heat will not kick on any suggestions
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 20, 2009, 09:46 AM

    Shut off power to furnace, turn it back on and see if it lites. Make sure filter is clean. If unit still won't lite, check all limit controls.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace [ 2 Answers ]

I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?

Bryant furnace [ 0 Answers ]

My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070

Bryant furnace [ 1 Answers ]

I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...

Bryant Furnace Plus 80 [ 2 Answers ]

Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...

View more questions Search