Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Correct size pex
[ 3 Answers ]
I am in the process of remodelling my home. As I do I am going to remove old galvanized heating pipe and replace it with pex. It is a fhw heating system that has copper piped baseboard heat. The old heat ipe is indeed soldered to the galvanized and you can see the rusting or breakdown where the...
Purchasing the correct thermostat
[ 1 Answers ]
Need help picking the correct replacement Thermostat. I have a Coleman Evcon 2 stage Heat pump in a Mobil Home. It has 2 mercury switches and an Emergency Heat Switch. I also have an Energy Saver System on this house that limits the on peak KW. It controls the Heat/Air, Hot water heater, and...
Correct size of the HVAC unit
[ 1 Answers ]
Hi, I am replacing Central heating AC system in the house and getting very different estimates for HVAC unit sizes from different contractors. I live in Massachusetts close to the ocean (could be very humid) Unit goes to two stores 27x25 totally 1350 sf addition built in 1974. Addition opens...
What is correct size ac system for 1500 sq ft
[ 2 Answers ]
What is the correct size ac system for 1500 sq ft
Correct Size AC Unit?
[ 1 Answers ]
I live in PA and my home was built 7 years ago and a Carrier Model 38TKB036300 central air system was installed. The home is two stories, has about 3200 sf living space, with a 500 sf great room that has a 20' ceiling. When I turn on my AC, it will only drop the temperature 1° per hour. (It has... View more questions Search
|