Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Matching up the correct capacitor with the correct condenser fan motor?
[ 4 Answers ]
How crucial is it to match the right capacitor to the right condenser fan motor? If you have the wrong capacitor, can this cause the motor to stop after running for a while, say 20 or 40 minutes? It would start up again, but would allways stop. The specs for the motor are: Emerson E-line, model no...
PPR market size in terms of global hot and cold water piping system
[ 12 Answers ]
Hi!! I am doing a research on PPR piping and I am interested to know the over all PPR piping share in the global market. So I will be extremely gratefull if any 1 can share this data with me. Thanks
Add a pop-up drain in older bathroom tub.can't find correct size?
[ 3 Answers ]
Recently went about replacing an older rusty drain in an inset tub, get the special drain removal tool (vertical piece with hole for screwdriver to help twist out drain). Removed old drain with much effort, then purchased new kit from Home Depot. All "standard" replacement drains including any...
Correct size of Return Air Vent Opening
[ 2 Answers ]
What is the correct size for a return air vent opening if I'm using a 4-ton 13SEER A/C? Thanks! Jeff
Correct Size AC Unit?
[ 1 Answers ]
I live in PA and my home was built 7 years ago and a Carrier Model 38TKB036300 central air system was installed. The home is two stories, has about 3200 sf living space, with a 500 sf great room that has a 20' ceiling. When I turn on my AC, it will only drop the temperature 1° per hour. (It has... View more questions Search
|