Ask Experts Questions for FREE Help !
Ask
    mujjurcs's Avatar
    mujjurcs Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2009, 10:47 PM
    Xp what is the white secreen with error message
    Dear
    I have Dell laptop model C600
    Atfer I switch on the system , it show DELL , booting up bar then suddenly I receive this message
    White Screen and Message
    --------------------------------------------------------------------------------

    The following message is displayed in white letters on a white background.

    The device in the system modular bay cannot be identified. It may not be completely inserted or may have some other problem. Please read and complete the following steps in order:

    1. press the device completely and firmly into the bay.
    2. press the esc key wait for the system to power down.
    3. press pwr button try redetecting the device.
    mujjurcs's Avatar
    mujjurcs Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Dec 13, 2009, 10:55 PM
    Booting problem,white screen
    White Screen and Message after booting into Windows XP

    --------------------------------------------------------------------------------

    The following message is displayed in black letters on a white background.

    The device in the system modular bay cannot be identified. It may not be completely inserted or may have some other problem. Please read and complete the following steps in order:

    1. press the device completely and firmly into the bay.
    2. press the esc key wait for the system to power down.
    3. press pwr button try redetecting the device.

    Do I need to instal the OS again, if so how I can do, help me out from this problem
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #3

    Dec 14, 2009, 05:17 AM

    Sounds like your computer is a laptop. Try removing the CD-drive from the modular bay and then reboot. In fact, I'd remove whatever is in both bays, reinsert the battery, and reboot. You're trying to determine which component is causing the problem.

    Good luck,
    WallyH
    mujjurcs's Avatar
    mujjurcs Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Dec 15, 2009, 12:05 AM

    Yes, it is dell laptop model C600,
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #5

    Dec 15, 2009, 12:19 PM

    I did a little research, and it seems that either the cd drive is loose or the hard drive is loose.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #6

    Dec 15, 2009, 04:45 PM

    Check out troubleshooting section in your manual - should be some info there.

    system modular bay cannot be identified
    Could be something like the hard drive, cd rom drive, the battery may not be seated correctly.

    Check those out and possibly, if possible, try to remove those devices and reseat them and make sure good connection
    -seems system board cannot recognize an item connected to the laptop
    mujjurcs's Avatar
    mujjurcs Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Dec 16, 2009, 12:51 AM

    Dear All,

    Thanks a lot, for valuable information, you are apsalute correct, its CD drive problem.
    Thanks a lot
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Error Message [ 7 Answers ]

I recently started my laptop and noticed that I have an 'error log' showing; hs_err_pid2916. How do you correct this error?

Error message [ 1 Answers ]

How do I fix this error url://ieframe.dll/preview.dlg

Error message [ 4 Answers ]

I was attempting to clean up my PC to hand it over to my Son for his B-Day. I used Sys Mechanic 6. After running some applications, I now get error message: C:\PROGRAM-1\MYWEBS-1\bar\2.bin\MWSBAR.DLL On uper left top of error box is RUNDLL. Please help me with this, His B-Day is in a few day....

Error message [ 1 Answers ]

Error message , scrips error in internet explorer What does it mean ?

Error message [ 1 Answers ]

I am getting an error message that says "C:\program1\symantec\s32evnt1.DLL. An installable virtual device driver fialed Dll initialization. Choose "close" to terminate the application. I don't have Symantec/Norton Anti-Virus installed on my computer. I get this error when I'm trying to remove...

View more questions Search