Ask Experts Questions for FREE Help !
Ask
    pdwedd's Avatar
    pdwedd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2009, 11:21 AM
    Goodman gpd075-3 ignitor
    I have a goodman gpd-075-3. The ignitor ignites for about 4-5 seconds then kicks off. It will do this every 1-2 mintues. Why won't it stay on?

Check out some similar questions!

No power to ignitor [ 7 Answers ]

Hi; I have a goodman furnace model GMP075-3 and I have no power going to my hot surface ignitor power vent satrts up and I hear the control board click and my voltmeter shows 0.05 and jumps to 0.06 and back to 0.05 when it clicks. I hear the gas valve open and then shut when no flame after...

Need to buy a new ignitor [ 2 Answers ]

Around midnight we noticed our furnace had not kicked on in a while, closer looked showed us we were getting an ignitor failure code. After cleaning the flame sensor we are still getting the same error code. Our next step will be to replace the ignitor. The problem is we are not sure where to start...

Cleaning the ignitor [ 1 Answers ]

I have a Janitrol GUP075-3A furnace. Can you tell me how to clean the ignitor.

Furnace ignitor [ 1 Answers ]

Hi everyone. I am having a problem with my furnace. The ignitor won't lite the gas. I can lite it with a long match and it works fine until the thermostat cuts it off. I changed the ignitor thinking that was the problem, but it still won't lite by its self. How do I check to see if I am getting...

Location of goodman ignitor [ 2 Answers ]

I had a technician come out to check my furnace and told me that I need a new ignitor for a goodman furnace. He removed the ignitor and I ordered one online but I am not sure where the ignitor is located at within the furnace.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.