Ask Experts Questions for FREE Help !
Ask
    jansenrizza's Avatar
    jansenrizza Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2007, 07:00 AM
    Location of goodman ignitor
    I had a technician come out to check my furnace and told me that I need a new ignitor for a goodman furnace. He removed the ignitor and I ordered one online but I am not sure where the ignitor is located at within the furnace.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 14, 2007, 07:26 AM
    Go to Famous Parts . Com for diagrams of goodman units
    stathy1's Avatar
    stathy1 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 17, 2007, 10:01 PM
    Quote Originally Posted by jansenrizza
    i had a technician come out to check my furnace and told me that i need a new ignitor for a goodman furnace. he removed the ignitor and i ordered one online but i am not sure where the ignitor is located at withing the furnace.
    The igniter should be located in front of the entrance to the gas tubes. It should be screwed in with two screws and have a connector that plugs into it. If you have the new part you should be able to see it in the front of the furnace when you take off the cover
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace ignitor needs to be replaced and an additional valve? [ 1 Answers ]

Our furnace started blowing out only cold air and the fan seems to run even if the thermostat is off, we tried replacing the thermostat and that was not the problem. It is a tech-4 gas furnace True blue 90. We were told it was the ignitor and that our model would also need to have an additional...

Carrier Ignition Lockout Code & Ignitor Problem [ 3 Answers ]

The code I'm getting is 14 for ignition lockout, will reset in 3 hrs. The furnace tries to ignite 3 or 4 times and then the code trips and shuts the furnace down. I usually just flip the manual switch to get it going again but if I'm not home to pay attention or if we're asleep the house will...

Possible ignitor problem [ 2 Answers ]

My York Gas Heater Won't Fire Up!! After Accessing Panel To Gas Components I Heard Rapid Ticking... ignitors I Suspect. But No Flame! Do I Have A Ignitor Problem? Txs In Advance, Matt

I need a new heater coil and ignitor [ 3 Answers ]

My a/c guy told me I need a new heater coil and ignitor, but its going to be expensive. I am handy and electronically and mechanically inclined, can someone help me do it myself? Thanks!

Re-location [ 3 Answers ]

Born 1-16-64, plan on making state re-location to Las Vegas... does anyone feel any feedback on this move. Any love interest in the near future? Thanks for your time and thought!. :D Brina

View more questions Search