Ask Experts Questions for FREE Help !
Ask
    segrest2424's Avatar
    segrest2424 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2009, 08:04 PM
    Rewiring the ceiling fan speed switch
    I have a Litex fan and the pull chain has been pulled out. The switch has 5 wires labeled L, 1, 2, 3, 4. I cannot find a 5-wire switch so far.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 2, 2009, 09:36 PM

    Was it a four speed fan?

    Try Litex's # first, it's in our sticky.

    Then try CeilingFanParts.com Home

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I fix my ceiling fan switch? [ 5 Answers ]

Hi, new to this site... I bought a Hunter ceiling fan from the depot and installed it and it worked fine until one of the kids snapped the chain off in the switch and it was stuck on low. I went and bought a new 4-wire switch for it and installed it. Now when I plug my switch housing into the fan...

Replacing a 3 speed ceiling fan switch [ 1 Answers ]

I'm trying to replace a 3 speed ceiling fan switch. I thought I removed and replaced all wires correctly but obviously not. The colors are green,gray,black, and brown. Positions on the switch are 1,2,3 and L.

3-speed fan switch [ 2 Answers ]

Wires were take off before by someone that lived here be4 so I want 2 fix the fan and I don't know where the wiers go and the packaging doesn't have it and I don't want 2 mess yhe fan up.:)

Connect ceiling fan wires to ZE268S6 pull chain switch [ 2 Answers ]

I ordered a new pull chain switch from Hunter and I want to install it myself. It's configured a bit differently than the original. The switch has 4 slots on the side like the original (Well Tec) and also 4 small round holes on the top. Can someone tell me where and how to connect the fan...

Hooking up a solid state speed control for my ceiling fan [ 1 Answers ]

I have an ellington ceiling fan that is currently turned on and off via a wall mounted light switch I purchased a solid state speed control, but can't figure how to hook it up. a:)ppreciate help.

View more questions Search