Ask Experts Questions for FREE Help !
Ask
    tjmwcm's Avatar
    tjmwcm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2009, 04:06 PM
    Replacing a 3 speed ceiling fan switch
    I'm trying to replace a 3 speed ceiling fan switch. I thought I removed and replaced all wires correctly but obviously not. The colors are green,gray,black, and brown. Positions on the switch are 1,2,3 and L.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 1, 2009, 10:02 PM

    You probably have the right wiring and the wrong replacement switch. See:

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More

    What make is the fan?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan will not work after replacing 3 speed pull chain switch [ 129 Answers ]

I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...

How do I fix my ceiling fan switch? [ 5 Answers ]

Hi, new to this site... I bought a Hunter ceiling fan from the depot and installed it and it worked fine until one of the kids snapped the chain off in the switch and it was stuck on low. I went and bought a new 4-wire switch for it and installed it. Now when I plug my switch housing into the fan...

Replacing speed control switch on ceiling fans [ 1 Answers ]

Hello, I have just replaced a speed control switch on my ceiling fan and now it doesn't work at all.The kight works but the fan makes a humming sound when I try to turn on the fan.I did switch the (4)wires one at a time so I didn't mix the wires up. Please Help!

3-speed fan switch [ 2 Answers ]

Wires were take off before by someone that lived here be4 so I want 2 fix the fan and I don't know where the wiers go and the packaging doesn't have it and I don't want 2 mess yhe fan up.:)

Hooking up a solid state speed control for my ceiling fan [ 1 Answers ]

I have an ellington ceiling fan that is currently turned on and off via a wall mounted light switch I purchased a solid state speed control, but can't figure how to hook it up. a:)ppreciate help.

View more questions Search