Ask Experts Questions for FREE Help !
Ask
    heatman1's Avatar
    heatman1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 10, 2009, 07:03 PM
    Venter blower not staying on
    I have Goodman model GMP125-4
    I have changed the pressure switch but the furnace still only comes on when it pleases.
    I have power to the vent blower but it does not kick on which in turn does not let the igniter work. When I push on the nylon which is around the spade connector to which the power go to the blower. The blower will kick on but will not stay on. Can there be a loose connection somewhere at this wire ?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 10, 2009, 07:21 PM
    Yep sounds like a loose connection to me. Test check with meter
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman. [ 8 Answers ]

FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S

Blower motor staying on [ 3 Answers ]

I have a rheem criterion II

Goodman Furnace Venter [ 2 Answers ]

I have Goodman Furnace model GMT 090- 3 installed in 1999 and it has stop working and when I open the cover of furnace I can see there is a red LED light that blinks three times and stops after a second or so it again blinks three times and stops this cycle is keep going, and furnace doesn't start....

Central air conditioning -- inside blower not staying on [ 3 Answers ]

My central air conditioning system is not working. The outside ac unit is on, but the inside blower is on for just a couple seconds before cutting out. The inside blower works when I change the thermostat to heat mode. I've checked the inside circuit breakers and the outside fuses and they are...

My Power Venter gives me problems [ 1 Answers ]

I have a sidewall power venter for my furnace instead of a chimney and each year I have times when the power venter does not come on, therefore the furnace does not come on. I have had people in to look at it and they recommend removing it since they claim it is not necessary for my particular...

View more questions Search