Ask Experts Questions for FREE Help !
Ask
    buggymanbilly's Avatar
    buggymanbilly Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2009, 07:40 AM
    Airhandler hook up
    Working on goodman heat pump style airhandler unit thermostat wiring got yanked out of it need to know how to hook back up wire colors from unit are white red grey brown (white wire is pig tail inside with white blue purple)
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 8, 2009, 09:12 AM
    Look on the inside of the blower access door for a complete wiring diagram. All units come with one. Also post exact model number for any further questions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Temperature of feed tubes at airhandler [ 1 Answers ]

I have a heat pump which appears to be working normally. In the heat mode, and the outside temperature about 45 degrees, and the unit running for about 20 minutes, I checked at the indoor air hander the tubes going into/out of the evaporator coil. The larger tube was too hot to hold, the smaller...

Airhandler (inside blower) works intermittently [ 5 Answers ]

Help! Please I recently changed my heat pump capacitor after fan stopped working. Two days later, blower to inside unit stopped. After turing off all the breakers (i.e heat pump and inside blower motor, etc.) it worked for two days. Then I changed capacitor to air handler unit, thinking this...

I have a honeywell airhandler blowing cold air [ 1 Answers ]

I thought it was the boiler but that is working, I thought is was the filter but its clean enough. I filled up the propane tank so I'm not out of gas. I've shut the system down and turned it back on. Still blowing cold air. What to do?:

A/C airhandler fan won't cut on, intermittingly [ 2 Answers ]

A/C compressor on heat pump works fine, but occasionally it runs and the airhandler fan does not cut on, causing outside unit to freeze. If I turn thermo switch off and back on, it usually corrects the problem and it works fine until it fails to cut on again, maybe 5 minutes, or maybe a week. If...

View more questions Search