 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a honeywell airhandler blowing cold air
I thought it was the boiler but that is working, I thought is was the filter but its clean enough. I filled up the propane tank so I'm not out of gas. I've shut the system down and turned it back on. Still blowing cold air. What to do?:
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Our cold air registers are blowing cold air worse than if the windows were open. The hot air registers blow cold air but not as forceful (maybe because they are 1/3 the size of the returns) This only happens when the furnace is off and we are heating with the wood stoves. We have metal ducting...
i have been experiancing problems with my furnace blowing out cold air, the first time i checked the code light it was working normal, the second time it was flashing continuosly fast and it meant call for heat, the third time i checked it said to replace the IFC!! i have no idea what the ifc is,...
Yesterday my heater was working as normal. Today I replaced the filter in my Day & Night forced air heater. Later I bumped my thermostat when walking by it, but I'm not certain that this caused the problem. My heater turned on and blew hot air. I turned it all the way down, but the fan...
I installed the Honeywell RTH230B in the fall and just switched to air except it only blows out hot air. It is not displayed in the setup. There are for additional wires, blue, black, brown and orange. I don't know if they have anything to do with why no cool air is blowing or not. I have the...
I installed the Honeywell RTH230B in the fall and just switched to air except it only blows out hot air. I have a five wire set up but don't know where to put the extra blue wire. It is not displayed in the setup. Actually I just noticed there are for additional wires, blue, black, brown and...
View more questions Search
|
