Ask Experts Questions for FREE Help !
Ask
    NOVATreker's Avatar
    NOVATreker Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2009, 08:40 AM
    58STA110 Carrier furnace not igniting
    Hi all,

    I have a 58STA110 Carrier furnace manufactured in Oct of 02 that is not igniting. Cooling is fine. The induction fan starts and runs for a few seconds. I hear and smell the gas start blowing, but after a few seconds the gas shuts off followed by the fan cutting of several seconds later. The flame never ignites. The service light is showing an error code 14.

    Any ideas?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #2

    Nov 6, 2009, 10:01 AM
    Did you ever observe the glow from the hot surface ignitor? If not, it has failed or is not being powered by the circuit board.
    NOVATreker's Avatar
    NOVATreker Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 7, 2009, 09:25 AM

    I found the problem... The previous owner removed the hot surface ignitor. That would definaly cause a failure.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
    		  
    #4

    Nov 7, 2009, 10:39 AM
    Seek out part # LH33ZS004. Treat it like an egg, and don't touch the element with your bare hands.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Furnace not Igniting [ 1 Answers ]

I have a Bryant 350MAV036060 natural gas furnace. The blower is running non-stop, but there is no ignition. Also, there is no power at the thermostat. I tried resetting the furnace by turning it off for about 5 minutes then turning it back on, but the only thing that happens is the blower starts...

Nordyne furnace not igniting [ 3 Answers ]

Can a problem with natural gas pressure cause furnace problems? I have a Nordyne that since the city had a pressure problem does not ignite- no heat! Furnace repair man says that it is the sensor. Can this be caused by low gas pressure? Troube board on the furnace flashes 4 times indicating low...

Day & night furnace not igniting [ 1 Answers ]

Hey all: I have a '73 Day & Night furnace that won't ignite after being shut down for the season. I have a pilot light and the unit reponds to the thermosat, at least the blower kicks on. I have seen a couple of things that might be possible fixes and wanted some other opinons. 1 -replace...

Goodman furnace not igniting [ 25 Answers ]

I have a Goodman furnace (I think, that's what the guy who came to give me an estimate for having central air installed said) and it won't ignite. I had a vent blocked to one room in the house because I was scraping paint and didn't want the dust in the ducts. It was blocked for about 20 hours. ...

View more questions Search