Ask Experts Questions for FREE Help !
Ask
    monroefiredog's Avatar
    monroefiredog Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 2, 2009, 02:45 PM
    Coleman Eletric Furnace Thermostat Wiring
    I have a Coleman model 3500 electric furnace. The fan and heat/cool switchs are on the furnace. I am wanting to install a programmable thermostat and have the fan and heat/cool switches on the thermostat. There are only two wires going to the thermostat, I am going to pull out and replace these wires with a six wire. I have already bought the thermostat it is a Hunter Programmable model 44110. My question, does anyone know how to do this? If so please send me an wiring digrahm or tell me how to wire it the correct way.


    Thanks, Doyle
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 2, 2009, 04:37 PM
    You have the old coleman switch on the furnace unit. This was done to prevent the A/C installer from having to pull new 5 or 7 wire cable to the thermostat location. There is a wiring diagram on the inside of the control box on your unit or I am posting a generic one here.

    You will have to gut the controls you have now and rewire the whole shabang to make it work correctly. I can be of no further assistance but I wish you luck.
    Attached Images
  1. File Type: pdf Doc1.pdf (176.2 KB, 482 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman furnace [ 2 Answers ]

I have a new coleman furnace with a circuit board and the blower will not shut off after the burners cool off.. What will cause it to run all the time and not shut off. Gene

White-Rodgers Thermostat & Payne furnace - wiring - blown fuses [ 3 Answers ]

Over the summer my mechanical thermostat broke and I replaced it with a White-Rogers 1F78 (digital). I thought this was going to be easy, but in a long process of trial and error the furnace fuse blew several times. Finally we got the heater to work, but when we'd turn on the A/C, the fuse would...

Can't get the fan to come on coleman electric furnace [ 1 Answers ]

I have a 1999 coleman electric furnace in my mobile home the heating elements seem to Work fine but cani't get the fan to come on thermostate clicks when I move it back and forth, the relays click on the furnace.

Coleman gas furnace [ 1 Answers ]

I tried to start my gas furnace and nothing happened, I took cover off and by the light blinking my centrifugal switch is stuck open.. any one know what I could do to fix?

Coleman Gas furnace [ 3 Answers ]

I have a gas furnace in a mobile home coleman evon DGAT070BDC. A relay was clicking in the blend air box. I replaced the relay and might have put the wire on wrong. There is five wires, different colors going to the relay, with five numbers on the relay. 1. how can I get the correct...

View more questions Search