Ask Experts Questions for FREE Help !
Ask
    dshadwick's Avatar
    dshadwick Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 31, 2007, 06:24 AM
    Coleman gas furnace
    I tried to start my gas furnace and nothing happened, I took cover off and by the light blinking my centrifugal switch is stuck open.. any one know what I could do to fix?
    hixton's Avatar
    hixton Posts: 146, Reputation: 5
    Junior Member
     
    #2

    Oct 31, 2007, 08:53 PM
    Replace the motor the switch is on the end of it try lightly tapping on the base of the inducer motor the little motor on the right

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman Gas furnace [ 3 Answers ]

I have a gas furnace in a mobile home coleman evon DGAT070BDC. A relay was clicking in the blend air box. I replaced the relay and might have put the wire on wrong. There is five wires, different colors going to the relay, with five numbers on the relay. 1. how can I get the correct...

Coleman electric furnace [ 1 Answers ]

I have a Coleman electric furnace model eb23b. When it turns on the blower motor seems to be on high and comes on before heating element gets hot and blows not hot air but warm to cool air. Would it be the sequencer?

Coleman LP Gas Furnace [ 2 Answers ]

I salvaged a Coleman (model # 7975a856) Heat and Air unit from an old trailer. I got rid of the air portion with the intention of using it to heat my shop. It has four wires that ran to the old thermostat. (I don’t have the old thermostat.) They are red, white, green and blue. I do not know what...

Gas furnace [ 1 Answers ]

My Furnace will run for about 12 hours no problem then all of a sudden the pilot light will go out , for the past two days its done this.. It stopped at about 5.30 am then last night at about 1.30pm... I will go down and relight it and it will start right up... It blows hot air seems fine... ...


View more questions Search