 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring ceiling fan
I have a ceiling fan that I am trying to wire to a 3 way switch - 2 light switches and 1 fan. The fan has 4 wires- green-ground, white-neutral, blue-light, & black-motor... this is the hard part, the light has 9 wires and I don't know what is what except the ground. The nine wires are: bare, 2red, 3white, & 3black.
Can anyone tell me what I need to hook up to what?? Help me please |
||||
|
||||
|
jbeania, you are confusing us. 8 folks have read your post and no answers yet because a 3way is a type of a switch that can control a fixture from 2 different locations. You say you have 2 light swutches and a fan, that's not a 3 way. Can you give it another shot at explaining what you are doing? Also when you say light are you tellling us all the wires in the box above the light?/ the light fixture will only have 3 coming off it; black, white and green |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a ceiling fan/light between 2 3-way switches and a 2 wire going to a porch lite. All these wires come together in a junction box. Do I need a 14-3 to go to the ceiling Fan also and what goes where? I'm at a loss.
Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...
Over the weekend we installed two ceiling fans in two bedrooms... the fan portion was working fine but when we put in the lightbulbs the lighting portion was not working. I tried the fan this morning before work and the fan was still working and the lights were not. Now I am getting a call from...
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
Hello, I have a outdoor ceiling fan with Light kit (black, white & blue wiring coming from fan) From my ceiling box I have three blacks and three white wires along with the grounds. Need help on how to connect the fan wiring to the ceiling box. Thanks!
View more questions Search
|
