Ask Experts Questions for FREE Help !
Ask
    kawboy11's Avatar
    kawboy11 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2009, 04:08 PM
    My furnace won't lite
    I have a bryant furnace about 9 years old. I went to fire it up for the first time this year and it wouldn't light. The evacuation fan comes on and just stays on. I don't hear the gas relay click and the glow plug doesn't go on either. I cleaned and tested the flame sensor and still nothing happens. Yes... the gas is on. Does anyone have any ideas what my problem could be??
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 14, 2009, 04:30 PM

    Check to make sure pressure switch or switches are being pulled closed by draft inducer(evac fan) Check to make sure exhaust and intake vents are not blocked. Check to make sure hose and ports between pressure switch and draft inducer are not plugged and have no water in them. Do these simple checks, and we will take the next step.
    kawboy11's Avatar
    kawboy11 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 14, 2009, 05:48 PM
    I'll check everything you listed... Thanks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas Furnace will not lite [ 6 Answers ]

I have a 20 year old Rheem Gas Furnace with a standing pilot light. When I lite the pilot this season, everything worked fine. Furnace Fired up and all was good. Replace the panel, and by the time I took A few steps from the furnace it shut down. Now it will not relite. I have Jumped the...

Lite my furnace [ 0 Answers ]

I do not know how to lite my furnace and my kids are cold. Can you please tell me how. Thank you:(:confused:

Can not get my furnace to lite [ 5 Answers ]

Can someone please help me? We have a honeywell furnace I am not sure of what model. But we ran out of fuel, which triggered the furnace to kick the reset button off. We have bleed the fuel line after we got our fuel delivery. I have followed all the directions on how to start the furnace back...

Goodman furnace will not lite [ 1 Answers ]

My Goodman GMP series furnace will not lite. The inginiter glows but the burners will not lite. I am not getting the 24V to the gas valve. I can put 24V to it and all will work until the next time the thermostat call for heat and again the inginter will lite but the burners will not. You can hear...

Gas Furnace Doesn't Lite [ 3 Answers ]

My Carrier Furnace Igniter glows but the valve won't turn the gas on. I have discovered that the relay switch on the top of the valve has a bad connection to the pins (2 each) on the two solenoids. I can loosen this and slide up and down several times and it will work for awhile. My problem is that...

View more questions Search