 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a 20 year old Rheem Gas Furnace with a standing pilot light. When I lite the pilot this season, everything worked fine. Furnace Fired up and all was good. Replace the panel, and by the time I took A few steps from the furnace it shut down. Now it will not relite. I have Jumped the...
Can someone please help me? We have a honeywell furnace I am not sure of what model. But we ran out of fuel, which triggered the furnace to kick the reset button off. We have bleed the fuel line after we got our fuel delivery. I have followed all the directions on how to start the furnace back...
My Goodman GMP series furnace will not lite. The inginiter glows but the burners will not lite. I am not getting the 24V to the gas valve. I can put 24V to it and all will work until the next time the thermostat call for heat and again the inginter will lite but the burners will not. You can hear...
I have a amana furnace can't get the hot surface igniter to work... igniter is new, no power to it.. control board flashes once , meaning a lockout(?)furnace will light if I use lighter... I checked all 3 overloads and pressure switch, all show good... induction fan runs as soon as power is on,...
My Carrier Furnace Igniter glows but the valve won't turn the gas on. I have discovered that the relay switch on the top of the valve has a bad connection to the pins (2 each) on the two solenoids. I can loosen this and slide up and down several times and it will work for awhile. My problem is that...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
