Ask Experts Questions for FREE Help !
Ask
    spm59701's Avatar
    spm59701 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2009, 09:35 PM
    How do I clean my burners
    I have an older sears 600 series furnace that has four burners. One of the burners does not have a nice upward shooting flame. How do I clean the burner?
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #2

    Oct 11, 2009, 11:03 PM

    First you will need to remove the burners, if you can post a picture we can give you step by step instructions on how to remove them.
    JOA's Avatar
    JOA Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 12, 2009, 08:24 AM

    Why does the hot water furnace knock when the heat is on and does not knock when only the circulator is running? Is it possible the water is boiling? How can it be stopped?
    JOA
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
    		  
    #4

    Oct 12, 2009, 08:33 AM

    JOA, you are better off starting your own thread if you want your question answered. It sounds like you may have air in the system.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Burners come on, go off, come on, then they go away [ 3 Answers ]

Hi folks. I've got a problem with a Goodman GPG13 gas pack unit. When a call to heat is given all seems to work fine but the burners come on for a short time then some go off and come back on but after a while (a couple minutes) they all go off. And they stay off for the lock out time ~ I'm...

Difference between self clean and standard clean ovens [ 2 Answers ]

Hi, I'm getting a new stove and when I read descriptions I see some that says self cleaning,standard cleaning or manual clean. Can you tell me what the difference is? Thank you!

Oil burners [ 2 Answers ]

What causes an oil burner to not ignite occasionally?

Why do the burners go out before the fan even comes on? [ 2 Answers ]

The furnace ignites quickly with a blue flame and burns for approximately 2 minutes. Then the whole unit stops silent for about a second. Then the fan finally comes on after all of this and blows somewhat hot air for approximately 3 minutes. The entire cycle is 2 minutes of burners, then 3...

View more questions Search