 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool gold washer
If you have a Whirlpool gold washer(and some others for that matter)that won't go into spin cycle,there is a very good chance the problem is with the lid switch.On my Whirpool gold washer the lid switch separated slightly and I was able to to use two zip ties to hold it together.This fix may or may not work with all models but suspect the lid switch if your washer doesn't go into spin cycle.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Whirlpool Gold Catalyst washer stops running and displays an error code of F3 or F4.
My Whirlpool Gold (Catalyst) Washer model GSX9885JQO will suddenly not drain. I was in the middle of washing several loads of wash. I went to empty the clothes and put the next load in and it had not drained. I ran various parts of the drain cycle over. It will add new water, but wherever it is...
How do you remove the top of a Whirlpool Gold Catalyst Washer? There is a hose that connect at the top that is leaking.
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel?
I have a Whirlpool washer GSX9885JQ0 that burnt the motor and cap too. Is this a common problem. Is there a way to check the control board to see if that was the problem or is it one of those things that I need to replace the motor and if that burns up then next time I should replace the board...
View more questions Search
|
