Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Whirlpool Catalyst washer no motor movement, diagnoise?
[ 2 Answers ]
I have a Whirlpool Catalyst washer, Mod #GSX9885JQ0. It will not agitate nor spin, fills fine, seems like the issue is the machine 'thinks' it's working, no error codes/letters/numbers show in the display. I checked (as posed by ApplGuy on this site) the lid and off-balance switch with ohm meter,...
Whirlpool Gold Catalyst Washer problem
[ 15 Answers ]
Hi My model number is GSX9885JQ0 The washer will fill with water but doesn't agitate. The light on the control panel blinks instead of being on solid. It doesn't display an error code on the panel, just shows how much time is left. I also tried unplugging and letting it reset. I also tried using...
Whirlpool Gold Catalyst washer error message
[ 6 Answers ]
Whirlpool Gold Catalyst washer stops running and displays an error code of F3 or F4.
Whirlpool catalyst washer
[ 2 Answers ]
We have a catalyst washer model number GSX9885JQ0. My wife said it stopped agitating. I did the diagnostic steps given in the control panel and it agitates fine. The only thing that it didn't do was drain out of the machine on the drain test. It recirculated OK. During a wash cycle it actually...
Whirlpool Gold Catalyst Washer
[ 3 Answers ]
This was our FIRST Whirlpool washer/dryer set and our LAST!! How does one remove the control panel? View more questions Search
|