 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell Chronotherm IV Plus T8601D2019 - Fan
Honeywell Chronotherm IV Plus T8601D2019 -When I turn fan setting to ON position, I hear the thermostat click and the fan symbol comes on. However, the fan does not come on. Power is on. A/C technician indicates that I need a new thermostat. In the Auto mode the A/C compressor and fan runs.
|
||||
|
||||
|
http://customer.honeywell.com/TechLi...0s/69-1400.pdf
http://customer.honeywell.com/TechLi...0s/69-1410.pdf 24 volt power should be on the G=Green wire/terminal in the indoor unit if the thermostat is turned to fan ON instead of automatic or AUTO fan. If 24 volt power is not available at the green wire/terminal then the thermostat is not providing power for the fan On condition and the thermostat is probably defective. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Although I am setting the System to 'Off' the thermostat is not switching off and there is still cold air blowing through the ducts. Help please?
On a Honeywell Chronotherm IV Plus remote thermostat, how do you clear the flashing filter? Thanks. Charles
I just changed the filter in my air conditioner, how do I reset my thermostat to make the word "filter" stop blinking. I have looked up the owner's manual on-line but it does not address this problem. I have a Honeywell Chronotherm IV Plus programmable thermostat. Thanks for any help that you can...
How do I reset the filter reset button for Honeywell Chronotherm IV plus?
Honeywell Deluxe Programmable Multistage Thermostat, #T8624D Chronotherm IV Plus I have 2 of above thermostats and have had for about 5 years. It takes no batteries and is directly connected to a 24 volt source. Have one upstairs and one downstairs. Have noticed at times that the LCD on...
View more questions Search
|
