Ask Experts Questions for FREE Help !
Ask
    wbrucem's Avatar
    wbrucem Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 30, 2009, 11:36 AM
    Oil primary control reset will not reset.
    Oil primary control green light flashing.
    Will not reset due to loss of prime. Just
    Finished cleaning. Changed filter and obviously
    Has to be bled. AFG model Becket burner
    2 years old. How do I get the reset to reset so
    I can bleed the system? All working till now.
    Bruce
    wbrucem's Avatar
    wbrucem Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 30, 2009, 01:32 PM
    For those not as inquisitive as I. Take the unit off and the answer is on
    A label on the bottom. HOLD DOWN THE RED BUTTON FOR 45 SECONDS.
    AND... BINGO! YOU ARE BACK IN BUSINESS.
    Bruce
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #3

    Sep 30, 2009, 06:36 PM

    Don't repeatedly press the reset botton! Was this oil furnace serviced lately? Nozzels and filters need replaced annually.

    Don't put the fear of God into a potential serviceman and your wife when this furnace begins to walk across the floor because it has too much oil to burn off.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher 665 Ultra Control Lock Reset? [ 3 Answers ]

I have researched previous unlock codes and can't find one that works. My Dishwasher is a Kenmore 665 Ultra 15951791. The upper latch got bent, my wife bent it to allow door to close and now the Control Lock light is on solid. This happened a couple of years ago and I found a reset code here on...

Kenmore ultrawash control panel won't reset and no heat dry button keeps blinking [ 0 Answers ]

Some of the buttons on the control panel won't light up at all. If I press normal wash the no heat dry button lights up with it and then I can't press start. No matter what I push (other than drain/cancel) the no heat dry/lock button is on. I've tried unlocking it, turning off the breaker, pushing...

How do I reset my ceiling fan remote control to work? [ 4 Answers ]

My fan is currently running and I cannot stop it. The battery is new and I can see the red light blink when I press any switch. The remote control is not sending signals properly. I need to rest the buttons inside. It is changed accidentally.

How to install out door reset control for boilers! [ 5 Answers ]

Anyone ever install a outdoor reset control on a boiler. I found one made by taco, but wasn't sure if they were hard ti install. I know the sensor has to be on the North side of the house. Not sure if you need a argo control unit for the wiring?

Reset button keeps needing to be reset [ 2 Answers ]

The reset button on our oil furnace needs to be reset every 10 to 14 days. What can be the problem? We are leaving for the holidays and I'm concerned that we could come home to frozen pipes.

View more questions Search